Jump to content

Screenshots


Harold

Recommended Posts

Morning Harold, ;)

 

What is your server IP and Host.? The most basic way of turning on your servers screenshots is through using pb_commands.

 

You can find those and much more on the use of pb_commands HERE

 

To do this, first ask yourself what file are you using to load your server scripts. Most use a pbsvuser.cfg for this purpose. Now the simpliest way would be for you to just simply enter the basic commands that conrol on and off, etc.

 

Below is a simple setup that we currently on our servers to produce and maintain our screenshots

 

;// loading settings for PBSS

pb_sv_autoss 1 //[0=No, 1=Yes (default=0)]

pb_sv_autossfrom 200 to 400 //[Minimum # of seconds to wait before requesting next ss]

pb_sv_autossto 600 to 1200 //[Maximum # of seconds to wait before requesting next ss]

pb_sv_ssFloor 1 //[Low screenshot filename serial #]

pb_sv_ssCeiling 2000 //[High screenshot filename serial #]

pb_sv_ssWidth 1024 //[Requested pixel width of remote screenshots]

pb_sv_ssHeight 512 //[Requested pixel height of remote screenshots]

pb_sv_ssXpct 60 //[Percentage across screen for remote screenshots]

pb_sv_ssYpct 50 //[Percentage down screen for remote screenshots]

pb_sv_ssSrate 1 //[sample Rate for remote screenshots]

pb_sv_ssDelay 2 //[Maximum delay client waits before capturing screenshot]

pb_sv_SsPath "pb/svss/" //[Path where remote screenshots are saved]

 

Once these settings have been copied and pasted into your servers pbsvuser.cfg, simply restart your server and you should be good to go. As far as publicy viewing them, that sometimes is host decided, what I mean is some hosts don't allow for public viewing. Although their are not many oif them, they still do exist. So knowing who your host is would help determine the link you and the public ould use to view your screenshots.

 

Hope that help, and continue to ask questions if needed.

 

_________

 

Alternatively you can view the created PB Screenshot Guide provided by Fozzer that can be found using the link provided below.

 

PB Screenshot Guide

 

_________

 

 

[CLS]_Airborne328

Edited by Airborne328
Link to comment
Share on other sites

  • 2 years later...

Morning Harold, ;)

 

What is your server IP and Host.? The most basic way of turning on your servers screenshots is through using pb_commands.

 

You can find those and much more on the use of pb_commands HERE

 

To do this, first ask yourself what file are you using to load your server scripts. Most use a pbsvuser.cfg for this purpose. Now the simpliest way would be for you to just simply enter the basic commands that conrol on and off, etc.

 

Below is a simple setup that we currently on our servers to produce and maintain our screenshots

 

 

 

Once these settings have been copied and pasted into your servers pbsvuser.cfg, simply restart your server and you should be good to go. As far as publicy viewing them, that sometimes is host decided, what I mean is some hosts don't allow for public viewing. Although their are not many oif them, they still do exist. So knowing who your host is would help determine the link you and the public ould use to view your screenshots.

 

Hope that help, and continue to ask questions if needed.

 

_________

 

Alternatively you can view the created PB Screenshot Guide provided by Fozzer that can be found using the link provided below.

 

PB Screenshot Guide

 

_________

 

 

[CLS]_Airborne328

 

 

Hey I do not have a pbsvuser.cfg file but I have a pbsv.cfg file. can I copy and paste in their and just add my server info after that?

Link to comment
Share on other sites

Hey I do not have a pbsvuser.cfg file but I have a pbsv.cfg file. can I copy and paste in their and just add my server info after that?

 

Simply put, yes you can just copy and paste into your existing pbsv.cfg

 

Or you can just as easily create the pbsvuser.cfg using notepad, save and upload then restart server. If you need a FULL pbsvuser, let me know and ill send you one specific to your gaming server.

 

Airborne

Link to comment
Share on other sites

Simply put, yes you can just copy and paste into your existing pbsv.cfg

 

Or you can just as easily create the pbsvuser.cfg using notepad, save and upload then restart server. If you need a FULL pbsvuser, let me know and ill send you one specific to your gaming server.

 

Airborne

 

 

Please that would be great Airborne. :) Also pb_sv_SsPath "pb/svss/" //[Path where remote screenshots are saved] is where I put my game Ip of where my designated screen shots will be saved?

 

Thanks

Edited by diggyyyy
Link to comment
Share on other sites

not just the IP, the path as well

 

that is usually for a remote location that is not your game server

 

Remote location is the other than my Ip. My Ip to the game server is 74.63.54.119:1716... The Apache remote location is http://74.63.54.119:9000. So my guess would be the web addy for the apache remote location along with that Ip? Like this:

 

http://control.artofwarcentral.com/Templates/Default/service_home.aspx?serviceid=TC35510516510543552643575&svc_short_desc=Apache+12+Slots&back=%2fTemplates%2fDefault%2fservices.aspx

 

Sorry but still new to this :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.