MaydaX Posted March 5, 2010 Author Share Posted March 5, 2010 Ok, so the solution for now is AutoUpdate via the Hub then? For all us poor people who cannot afford pbsvuser access. :rolleyes: AutoUpdate via the Hub will only last until the server or pb is restarted. For those with no cfg file access it's better than nothing. Quote Link to comment Share on other sites More sharing options...
Everson Posted March 5, 2010 Share Posted March 5, 2010 Ok, so the solution for now is AutoUpdate via the Hub then? For all us poor people who cannot afford pbsvuser access. :rolleyes: *Waits for everyone to switch to the first GSP that allows PB folder access* Quote Link to comment Share on other sites More sharing options...
Kinsman Posted March 5, 2010 Share Posted March 5, 2010 (edited) Thats known, its Rackage. Unfortunately Hypernia is pretty much a monopoly here in Australia. Edited March 5, 2010 by Kinsman Quote Link to comment Share on other sites More sharing options...
Kinsman Posted March 5, 2010 Share Posted March 5, 2010 AutoUpdate via the Hub will only last until the server or pb is restarted. For those with no cfg file access it's better than nothing. Will it not re-add them at some point though? Quote Link to comment Share on other sites More sharing options...
Pisi-Deff Posted March 5, 2010 Share Posted March 5, 2010 Will it not re-add them at some point though? The MD5 autoupdate flag only sends new md5tool checks to the server when they are updated on our side (in the MCi). The checks are then stored in the server's memory -> server restart = wiped memory. ~ /*Pisi*/ Quote Link to comment Share on other sites More sharing options...
Kinsman Posted March 5, 2010 Share Posted March 5, 2010 Oh, my God. Quote Link to comment Share on other sites More sharing options...
spiff Posted March 5, 2010 Share Posted March 5, 2010 Got the server added to my account and ran the webtool successfully. How long does it take to start streaming? Where do i set SPAM messages? Is there welcome message option like there was for 2142? Quote Link to comment Share on other sites More sharing options...
MaydaX Posted March 5, 2010 Author Share Posted March 5, 2010 Got the server added to my account and ran the webtool successfully. How long does it take to start streaming? Where do i set SPAM messages? Is there welcome message option like there was for 2142? It should start streaming immediately if done correctly. No welcome or ban messages at this time because UCON cannot send messages to the server. Quote Link to comment Share on other sites More sharing options...
MaydaX Posted March 6, 2010 Author Share Posted March 6, 2010 Ok, so the solution for now is AutoUpdate via the Hub then? For all us poor people who cannot afford pbsvuser access. :rolleyes: I said I would work on file access and after a few days of talking with DICE, this is the list of files that are now allowed to be accessed: Read+write+create+delete: pb/svlogs/* pb/svss/* pbsv.cfg pbsvuser.cfg pbsvlog.cfg pbbans.dat *Read+delete: sv_viol.log sv_cheats.log This was made official and sent to RSPs an hour ago. So ask your RSP to check their emails from DICE and give you access :) Quote Link to comment Share on other sites More sharing options...
spiff Posted March 6, 2010 Share Posted March 6, 2010 It should start streaming immediately if done correctly. No welcome or ban messages at this time do to UCON cannot send messages to the server. Thanks I see it is streaming now. I was just emailed by the RSP saying they are going to update to R5 server build. Which I guess means I need to run the webtool again to up the streaming? BTW - thanks for the work PBBans have been putting into this.!! Quote Link to comment Share on other sites More sharing options...
packet_loss Posted March 6, 2010 Share Posted March 6, 2010 (edited) i still cannot get our server streaming ;Auto Generated by PunkBuster Server ; Some of the following settings may not apply, ; consult manuals at evenbalance.com for full documentation pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)] pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)] pb_sv_KickLen 2 //[Minutes (default=2)] pb_sv_CvarFreq 6 //[# of range checks per minute] pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither] pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists] pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)] pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 100 //[High screenshot filename serial #] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] pb_sv_AutoSsFrom 60 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss] pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)] pb_sv_ssLogging 0 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 0 //[seconds] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_HttpPort 1000 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpKey "xxxxxxxx" //[Key] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_ScoreKick 0 //[Min score (negative)] pb_sv_ChangePeriod 999 //[seconds] pb_sv_ChangeMax 1 //[Max name changes allowed] pb_sv_DupNameGrace 0 //[seconds] pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)] pb_sv_ExtChar 1 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" // pb_sv_HttpColBack2 "808080" // pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)] pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_UpdateGrace 600 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 1 //[seconds to wait before No GUID kick] pb_sv_AliasFn "" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists) ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text] ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)] pb_sv_cvarempty ;PB UCON Settings / Lists pb_sv_usessionlimit 8 pb_sv_ucontimeout 300 pb_sv_uconmaxsendrate 16 pb_sv_uconempty pb_sv_uconadd 1 "208.122.49.138" "pbbhub1" "pbbanshub" pb_sv_uconignoreempty what is suppose to be in the pbucon.use file, from what i can tell it has the same exact contents as my pbsv.cfg witch means the info i have posted aabove is in both pbsv.cfg and pbucon.use file thanks packet Edited March 6, 2010 by Pisi-Deff Quote Link to comment Share on other sites More sharing options...
fozzer Posted March 6, 2010 Share Posted March 6, 2010 The pbucon.use file, ideally, should be a blank file. Quote Link to comment Share on other sites More sharing options...
packet_loss Posted March 6, 2010 Share Posted March 6, 2010 (edited) The pbucon.use file, ideally, should be a blank file. ok, well i cleared everything out of the pbucon.use and saved it, i thought maybe it might have something to do with my server not streaming. Edited March 6, 2010 by packet_loss Quote Link to comment Share on other sites More sharing options...
awormwithagun Posted March 6, 2010 Share Posted March 6, 2010 webtool works a treat, server is streaming. Is at a good idea to check the boxes for the 2 external banlists? at the moment Ive left them blank thnx ;) Quote Link to comment Share on other sites More sharing options...
(FG) mastermc0 Posted March 7, 2010 Share Posted March 7, 2010 webtool works a treat, server is streaming. Is at a good idea to check the boxes for the 2 external banlists? at the moment Ive left them blank thnx ;) Yes good idea to use them more extensive ban list as it incorporates Punksbusted GGC etc. (Sure one of the staff could give you a better list than me) Quote Link to comment Share on other sites More sharing options...
=)BiT(=Clan Posted March 7, 2010 Share Posted March 7, 2010 (edited) ok, well i cleared everything out of the pbucon.use and saved it, i thought maybe it might have something to do with my server not streaming. Packet Loss, I think it's MyIS. We have our NA server with them, and our EU server with KillerKreations. I first tried to stream with our NA server ( Myis) and tried various methods to get it working repeatedly. Nothing worked, it still isn't streaming. However my first attempt with the KillerKreations server has it streaming perfectly. I have another question, earlier in the thread it was said that autoupdate would only last untill the server or PB was restarted if set up with the webtool/console. Is this the case if you actually edit pbsv.cfg etc? Edited March 7, 2010 by =)BiT(=Clan Quote Link to comment Share on other sites More sharing options...
packet_loss Posted March 7, 2010 Share Posted March 7, 2010 i am able to to edit the pbsv.cfg file, i even setup pb webtool from the pbsv.cfg 69.12.109.36:1000 and ran the streaming commands from pb webtool and restarted the server and still no streaming i have used the 1.26 version of webtool through pbbans, tried bc2guardian. i know =SOE= has their server myis and their server is streaming packet Quote Link to comment Share on other sites More sharing options...
MaydaX Posted March 7, 2010 Author Share Posted March 7, 2010 Packet Loss, I think it's MyIS. We have our NA server with them, and our EU server with KillerKreations. I first tried to stream with our NA server ( Myis) and tried various methods to get it working repeatedly. Nothing worked, it still isn't streaming. However my first attempt with the KillerKreations server has it streaming perfectly. I have another question, earlier in the thread it was said that autoupdate would only last untill the server or PB was restarted if set up with the webtool/console. Is this the case if you actually edit pbsv.cfg etc? AutoUpdates apply to MD5 Tool checks which will not save. Streaming commands ended with the pb_sv_writecfg command will be saved. As for the MyIS servers, make sure it's on the right IP. Use client logging to get the server ip that PB sees. http://www.pbbans.com/info-center-clientlog.html Quote Link to comment Share on other sites More sharing options...
packet_loss Posted March 7, 2010 Share Posted March 7, 2010 As for the MyIS servers, make sure it's on the right IP. Use client logging to get the server ip that PB sees. http://www.pbbans.com/info-center-clientlog.html Ok i followed the steps and this is what i came up with Connected to Server 69.12.109.19:2489 now do i add the server with the port being 2489 or the default port of 19567 thanks packet Quote Link to comment Share on other sites More sharing options...
awormwithagun Posted March 7, 2010 Share Posted March 7, 2010 Yes good idea to use them more extensive ban list as it incorporates Punksbusted GGC etc. (Sure one of the staff could give you a better list than me) thnx, just updated it to include the external lists, the way i see it is the more ban lists we can use the less hacktards will be able to join the server ;) Quote Link to comment Share on other sites More sharing options...
tankmayhem01 Posted March 7, 2010 Share Posted March 7, 2010 Hi guys, New to owning a server. I'm trying apply for team application ( trying to setup pbbans on my bad company2 server) But it says the ip 68.232.177.130:19567 is blacklisted when I submit info. Why is it blacklisted? Just got it on the 2nd of march... Quote Link to comment Share on other sites More sharing options...
Unleashed2k Posted March 7, 2010 Share Posted March 7, 2010 Ok i followed the steps and this is what i came up with Connected to Server 69.12.109.19:2489now do i add the server with the port being 2489 or the default port of 19567thankspacket I'm still having the same issues as packet_loss. I am with MyIS and I have tried the Automated Hub Setup, setting everything up manually, AND BC2 Guardian.I've noticed when I enter all the commands in RCON, and I type pb_sv_uconlist it just gives me PunkBuster Server: [slot] [Type] [Mask] [Name]with nothing else. But yeah i've tried everything in the book and i'm stumped. I have zero clue whats wrong. me messing around in rcon w/ pb <- pb_sv_writecfg pbucon.use OK -> PunkBuster Server: Config File written to *\pb\pbucon.use <- pb_sv_restart OK -> PunkBuster Server: Preparing to Restart PB Server... (*\pb\) -> PunkBuster Server: pb_sv_SsNext = 170838 (0 to 999999) -> PunkBuster Server: Game Version [521187] <- pb_sv_USessionLimit 8 OK -> PunkBuster Server: pb_sv_USessionLimit = 8 (0 to 16) <- pb_sv_uconadd 1 208.122.49.138 "pbbhub1" "pbbanshub" OK -> PunkBuster Server: PB UCON Profile not added due to duplicate profile name (pbbhub1) <- pb_sv_task 0 3600 pb_sv_ver OK -> PunkBuster Server: PB Scheduled Task Added: 0 3600 pb_sv_ver -> PunkBuster Server: Running PB Scheduled Task (slot #1) pb_sv_ver <- pb_sv_task 0 86400 pb_sv_update OK -> PunkBuster Server: PB Scheduled Task Added: 0 86400 pb_sv_update -> PunkBuster Server: Running PB Scheduled Task (slot #2) pb_sv_update <- pb_sv_AutoUpdBan 1 OK -> PunkBuster Server: pb_sv_AutoUpdBan = 1 (0 to 1) <- pb_sv_writecfg OK -> PunkBuster Server: Config File written to *\pb\pbsv.cfg <- pb_sv_uconlist OK -> PunkBuster Server: [slot] [Type] [Mask] [Name] -> PunkBuster Server: Master Query Sent to (MASTER5.EVENBALANCE.COM) 66.36.231.175 <- pb_sv_restart OK -> PunkBuster Server: Preparing to Restart PB Server... (*\pb\) -> PunkBuster Server: pb_sv_SsNext = 170838 (0 to 999999) -> ^5PunkBuster Server: Game Version [521187] -> ^5PunkBuster Server: Running PB Scheduled Task (slot #1) pb_sv_ver -> ^5PunkBuster Server: Running PB Scheduled Task (slot #2) pb_sv_update <- pb_sv_uconlist OK -> ^5PunkBuster Server: [slot] [Type] [Mask] [Name] <- pb_sv_restart InvalidPbServerCommand <- pb_sv_restart OK -> ^5PunkBuster Server: Preparing to Restart PB Server... (*\pb\) -> PunkBuster Server: pb_sv_SsNext = 170838 (0 to 999999) -> PunkBuster Server: Game Version [521187] -> PunkBuster Server: Running PB Scheduled Task (slot #1) pb_sv_ver -> PunkBuster Server: Running PB Scheduled Task (slot #2) pb_sv_update <- pb_sv_uconlist OK -> PunkBuster Server: [slot] [Type] [Mask] [Name] -> PunkBuster Server: NOTICE: PB Client (0/10002) out of sequence - Slot #10 <- pb_sv_writecfg pbucon.use OK -> PunkBuster Server: Config File written to *\pbucon.use <- pb_sv_restart OK -> PunkBuster Server: 8 Aliases Written to pbalias.dat -> PunkBuster Server: pb_sv_SsNext = 170838 (0 to 999999) -> PunkBuster Server: Game Version [521187] -> PunkBuster Server: Running PB Scheduled Task (slot #1) pb_sv_ver -> PunkBuster Server: Running PB Scheduled Task (slot #2) pb_sv_update <- pb_sv_USessionLimit 8 OK -> PunkBuster Server: pb_sv_USessionLimit = 8 (0 to 16) <- pb_sv_uconadd 1 208.122.49.138 "pbbhub1" "pbbanshub" OK -> PunkBuster Server: PB UCON Profile not added due to duplicate profile name (pbbhub1) <- pb_sv_writecfg OK -> PunkBuster Server: Config File written to *\pbsv.cfg -> PunkBuster Server: [From #5 3f49(-) Tempura [sG]] [0 changed cvars found] -> PunkBuster Server: Master Query Sent to (MASTER7.EVENBALANCE.COM) 216.240.146.139 <- pb_sv_restart OK -> PunkBuster Server: 8 Aliases Written to pbalias.dat -> PunkBuster Server: pb_sv_SsNext = 170838 (0 to 999999) -> PunkBuster Server: Game Version [521187] -> PunkBuster Server: Running PB Scheduled Task (slot #1) pb_sv_ver -> PunkBuster Server: Running PB Scheduled Task (slot #2) pb_sv_update -> PunkBuster Server: Master Query Sent to (MASTER7.EVENBALANCE.COM) 216.240.146.139 -> PunkBuster Server: Lost Connection (slot #1) 98.238.253.124:10000 4ca2319a89edc5e7031c4fcff8a6ab3e(-) Bradyy -> PunkBuster Server: Lost Connection (slot #9) 24.67.36.60:10000 a98bf2de033c2283bd563716c8ff7b6a(-) =ST2= Pootin -> PunkBuster Server: Lost Connection (slot #8) 72.174.122.8:10000 1de81921ead8dc1e3bdfb21345c1a176(-) Masterofwar -> PunkBuster Server: Lost Connection (slot #3) 121.7.133.137:10000 4d5ae975a3ca11dedc485edae2715ef4(-) TeD_ -> PunkBuster Server: Lost Connection (slot #4) 218.186.43.5:10000 9eb57dd058a29dbd3069fc67428f98da(-) [13]Blackwater -> PunkBuster Server: Lost Connection (slot #7) 77.64.202.177:10000 212dc23eded4171a306bde942692acef(-) El-Hulk -> PunkBuster Server: Lost Connection (slot #10) 70.140.42.122:10000 9bd7a7549582b0856c85c6af13fe4b99(-) =ST2=Woogie -> PunkBuster Server: Lost Connection (slot #5) 58.182.149.106:10000 822cbb291cc2502910d0623891343f49(-) Tempura [sG] -> PunkBuster Server: Lost Connection (slot #2) 93.135.212.82:10000 56f74db8e1f077f1bc99b64575f22be3(-) Nafalem -- oh nice. gotta love EA everyone just dropped. ROFL // I've tried emptying all the files, then letting the auto hub install do its thing, then it still doesn't runmy pb ucon keeps getting the above config in there too. so both shows, but its empty atm i've set it to just "// Used to enable PBUCON.".. hopefully i'm overlooking something.(i've checked ip, it's right)69.12.63.11:19567 Thanks if anyone can help me figure this out. I'll be online by 9 or 10 est. - Mark (Unleashed2k - Unleashed to Kill) (p.s. my config my post got screwed up and had to retype alot, so if anythings out of place you know why) ;Auto Generated by PunkBuster Server ; Some of the following settings may not apply, ; consult manuals at evenbalance.com for full documentation pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)] pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)] pb_sv_KickLen 5 //[Minutes (default=2)] pb_sv_CvarFreq 3 //[# of range checks per minute] pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither] pb_sv_CvarWalk 2 //[0=disabled, 1-4=Walk through obtained Cvar lists] pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)] pb_sv_CvarChangedPulse 60 //[Frequency to auto-send CvarChanged (minutes)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 2000 //[High screenshot filename serial #] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] pb_sv_AutoSsFrom 300 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss] pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)] pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 300 //[seconds] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpKey "" //[Key] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_ScoreKick 0 //[Min score (negative)] pb_sv_ChangePeriod 300 //[seconds] pb_sv_ChangeMax 5 //[Max name changes allowed] pb_sv_DupNameGrace 0 //[seconds] pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)] pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" //[background Color #1 in WebTool (default=000000)] pb_sv_HttpColBack2 "808080" //[background Color #2 in WebTool (default=808080)] pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)] pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_UpdateGrace 2400 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 10 //[seconds to wait before No GUID kick] pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists) pb_sv_task 0 7200 pb_sv_ver // Keep-Alive for PBBans Hub pb_sv_task 0 86400 pb_sv_update // Check for PB updates daily ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text] ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)] pb_sv_cvarempty ;PB UCON Settings / Lists pb_sv_usessionlimit 8 pb_sv_ucontimeout 90 pb_sv_uconmaxsendrate 16 pb_sv_uconempty pb_sv_uconadd 1 "208.122.49.138" "pbbhub1" "pbbanshub" pb_sv_uconignoreempty Quote Link to comment Share on other sites More sharing options...
MaydaX Posted March 7, 2010 Author Share Posted March 7, 2010 / Used to enable PBUCON.".. hopefully i'm overlooking something.(i've checked ip, it's right)69.12.63.11:19567 Thanks if anyone can help me figure this out. I'll be online by 9 or 10 est. What is the server name in BC2? Quote Link to comment Share on other sites More sharing options...
Unleashed2k Posted March 8, 2010 Share Posted March 8, 2010 Cafe Flesh HARDCORE FWF Clan Server Quote Link to comment Share on other sites More sharing options...
Big_Guy21 Posted March 8, 2010 Share Posted March 8, 2010 Cafe Flesh HARDCORE FWF Clan Server Joined the only server I found with that name and got: [03.07.2010 21:08:00] Connected to Server 69.12.63.2:1137 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.