Problem with PB Screenshots

hi
My question is pbss don´t work an our Server.
not automatic and not manual.
I can make a ss from my self. But not from a other Player.

Please Help whats wrong????

;Auto Generated by PunkBuster Server
; Some of the following settings may not apply,
; consult manuals at evenbalance.com for full documentation
pb_sv_MsgPrefix "^3PunkBuster Client" //[PB Message Prefix (default=^3PunkBuster Client)]
pb_sv_MaxDlRate 3 //[KB/sec requested per file (default=4)]
pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)]
pb_sv_KickLen 2 //[Minutes (default=2)]
pb_sv_CvarFreq 6 //[# of range checks per minute]
pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)]
pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)]
pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
pb_sv_SsFloor 1 //[Low screenshot filename serial #]
pb_sv_SsCeiling 1000 //[High screenshot filename serial #]
pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
pb_sv_SsWidth 800 //[Requested pixel width of remote screenshots]
pb_sv_SsHeight 410 //[Requested pixel height of remote screenshots]
pb_sv_SsXpct 85 //[Percentage across screen for remote screenshots]
pb_sv_SsYpct 15 //[Percentage down screen for remote screenshots]
pb_sv_SsSrate 2 //[Sample Rate for remote screenshots]
pb_sv_SsDelay 5 //[Maximum delay client waits before capturing screenshot]
pb_sv_SsPath "WE HAVE A ADRESS INSERT" //[Path where remote screenshots are saved]
pb_sv_AutoSsFrom 50 //[Min # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo 300 //[Max # of seconds to wait before requesting next ss]
pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)]
pb_sv_ssLogging 2 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
pb_sv_ssTimeout 0 //[Seconds]
pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
pb_sv_PowerMin 10 //[Power Points]
pb_sv_PowerDef 1 //[Power Points]
pb_sv_PowerKickLen 5 //[Minutes (default=5)]
pb_sv_HttpPort 0 //[Port #]
pb_sv_HttpAddr "" //[External IP Address]
pb_sv_HttpRefresh 30 //[Seconds]
pb_sv_HttpKey "" //[Key]
pb_sv_HttpMaps "dalian_plant dragon_valley gulf_of_oman mashtuur_city sharqi_peninsula strike_at_karkand daqing_oilfields fushe_pass kubra_dam operation_clean_sweep songhua_stalemate wake_island_2007 zatar_wetlands" //[Map list (separate by spaces)]
pb_sv_ScoreKick 0 //[Min score (negative)]
pb_sv_ChangePeriod 999 //[Seconds]
pb_sv_ChangeMax 1 //[Max name changes allowed]
pb_sv_DupNameGrace 30 //[Seconds]
pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]
pb_sv_ExtChar 1 //[0=No, 1=Yes (default=0)]
pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
pb_sv_HttpColText1 "000000" //[Text Color #1 in WebTool (default=FFFFFF)]
pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColBack1 "CFCFCF" //[Background Color #1 in WebTool (default=000000)]
pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
pb_sv_HttpColLine1 "009EEA" //[Line Color #1 in WebTool (default=FF0000)]
pb_sv_HttpColLine2 "51A2A2" //[Line Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)]
pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)]
pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogFloor 1 //[Low log filename serial #]
pb_sv_MinName 0 //[Min Characters in Player name (default=0)]
pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]
pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
pb_sv_UpdateGrace 300 //[Seconds to wait before Update Failure kick]
pb_sv_NoGuidGrace 1 //[Seconds to wait before No GUID kick]
pb_sv_AliasFn "" //[Filename (default="pbalias.dat")]
pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID]
pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]
pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists)

;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]

;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)]
pb_sv_cvarempty

;PB UCON Settings / Lists
pb_sv_usessionlimit 3
pb_sv_ucontimeout 300
pb_sv_uconempty
pb_sv_uconadd 1 "63.171.64.205" "pbbhub" "pbbhub"
pb_sv_uconignoreempty

There is a full tutorial on pbss here;
http://www.pbbans.com/forums/index.php?aut...amp;showfile=16

Key question;
Do you have full access to your servers PB directory ?
Screenshots are stored in the pb/svss folder and you will need access to that folder to view them.

THX for fast answers.

(Do you have full access to your servers PB directory ?) ?????? i don´t know

Yes i have full admin rights.
I have a Adress (sspath) Http://.......
so i have read the tutorial. but this dosn´t help me.
please help!
the setting are Right??

ADMIN????

pb_sv_SsPath "WE HAVE A ADRESS INSERT" //[Path where remote screenshots are saved]

Is "WE HAVE A ADRESS INSERT" the actual value you have for that line? Or do you have an actual directory?

Try changing it to pb_sv_SsPath "", that way it'll go to the default /svss/ folder.