Jump to content

Problem loading certaim maps on BF2/Win7 64


JalapenoOfDoom

Recommended Posts

Hello,

 

I have an unusual problem that is similiar to what I've seen in the forums. Please help me with this...

 

When I load Dragon Valley or Daqing Oilfields, the maps load to 14% and then crash to desktop. This is all in multiplayer, I haven't tried Single Player mode yet. However, I can load other maps, like Karkand, Blue Pearl, and Wake Island and play those just fine to a point. But after a round or two or three of those maps, I then crash to desktop also. Not all maps crash while loading, only found 2 so far, but have NOT tested all of them. Operation Road Rage loads fine and quickly.

 

My setup:

 

AMD Phenom II X4 965 ~3.4Ghz on auto mode

6gb DDR3 Dual Channel Ram

ATI HD5770 - latest drivers

Windows 7 64 bit running Direct X 11 according to dxdiag

UAC is off

Resolution in BF2 and Windows is both at 60hz no matter what the pixel res is.

Sound - Hardware and Software modes have both been tried

X-fi is not on

Sound is on-board Realtek with latest drivers

I also have Sound Blaster X-Fi Go! plugged in with latest Win 7 drivers.

Profile has been deleted and recreated

BF2 was ran under Windows 7 Compat mode, Windows XP SP2 and Sp3 compat mode, and Windows Vista Sp2 compat mode

Also have tried running under Windows 7 basic mode

Run as administrator chosen

PB Services updated and tested ok

PB setup up to date

I can run Call of Duty 4 with no problem

I have not tried BF2142 yet.

All Windows 7 updates installed

I've also tried 1024/768 at 60Hz mode

BF2 is installed in the Program Files (x86) folder

Kaspersky was enabled and disabled, no change

 

 

Anyway, any advice would be helpful, would like to know if there is a Windows 7 update coming out soon for BF2.

When I installed BF2, I loaded it first, then special forces, then 1.41, then 1.5

I reran 1.5 again last night - no change

So I removed all of BF2...rebooted, reinstalled it all, no Special Forces, just BF2 vanilla/1.41/1.5...reboot

same thing...

 

Does anything stick out as a problem?

 

Thank you for your help in this, I just built this machine last weekend and built it to play these games with less lag and better quality. Yes, it's alot of power, but built for future games in the coming years.

 

GA

Link to comment
Share on other sites

  • 2 months later...

Hello,

 

I have an unusual problem that is similiar to what I've seen in the forums. Please help me with this...

 

When I load Dragon Valley or Daqing Oilfields, the maps load to 14% and then crash to desktop. This is all in multiplayer, I haven't tried Single Player mode yet. However, I can load other maps, like Karkand, Blue Pearl, and Wake Island and play those just fine to a point. But after a round or two or three of those maps, I then crash to desktop also. Not all maps crash while loading, only found 2 so far, but have NOT tested all of them. Operation Road Rage loads fine and quickly.

 

My setup:

 

AMD Phenom II X4 965 ~3.4Ghz on auto mode

6gb DDR3 Dual Channel Ram

ATI HD5770 - latest drivers

Windows 7 64 bit running Direct X 11 according to dxdiag

UAC is off

Resolution in BF2 and Windows is both at 60hz no matter what the pixel res is.

Sound - Hardware and Software modes have both been tried

X-fi is not on

Sound is on-board Realtek with latest drivers

I also have Sound Blaster X-Fi Go! plugged in with latest Win 7 drivers.

Profile has been deleted and recreated

BF2 was ran under Windows 7 Compat mode, Windows XP SP2 and Sp3 compat mode, and Windows Vista Sp2 compat mode

Also have tried running under Windows 7 basic mode

Run as administrator chosen

PB Services updated and tested ok

PB setup up to date

I can run Call of Duty 4 with no problem

I have not tried BF2142 yet.

All Windows 7 updates installed

I've also tried 1024/768 at 60Hz mode

BF2 is installed in the Program Files (x86) folder

Kaspersky was enabled and disabled, no change

 

 

Anyway, any advice would be helpful, would like to know if there is a Windows 7 update coming out soon for BF2.

When I installed BF2, I loaded it first, then special forces, then 1.41, then 1.5

I reran 1.5 again last night - no change

So I removed all of BF2...rebooted, reinstalled it all, no Special Forces, just BF2 vanilla/1.41/1.5...reboot

same thing...

 

Does anything stick out as a problem?

 

Thank you for your help in this, I just built this machine last weekend and built it to play these games with less lag and better quality. Yes, it's alot of power, but built for future games in the coming years.

 

GA

 

Hey Dude,

 

Try to run it in administrator..... did u run an home or an ultimate 7 ?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.