Welcome to PBBans
|Welcome to PBBans, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of PBBans by signing in or creating an account.
Fear Pb config.Fear Pb config.
Posted Jun 30, 2007 - 12:15 PM
pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
pb_sv_MaxConDls 5 //[concurrent downloads (default=1)]
pb_sv_KickLen 2 //[minutes (default=2)]
pb_sv_CvarFreq 6 //[# of range checks per minute]
pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse 99 //[How often (in min.) to auto-send CvarUser command]
pb_sv_CvarChangedPulse 99 //[How often (in min.) to auto-send CvarChanged command]
pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogCeiling 1000 //[High log filename serial #]
pb_sv_SsFloor 1 //[Low screenshot filename serial #]
pb_sv_SsCeiling 1000 //[High screenshot filename serial #]
pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots]
pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots]
pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
pb_sv_SsSrate 1 //[Sample Rate for remote screenshots]
pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot]
pb_sv_SsPath "" //[Path where remote screenshots are saved]
pb_sv_AutoSsFrom 60 //[Minimum # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo 1200 //[Maximum # of seconds to wait before requesting next ss]
pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)]
pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
pb_sv_PowerMin 10 //[power points]
pb_sv_PowerDef 1 //[power points]
pb_sv_PowerKickLen 5 //[minutes (default=5)]
pb_sv_scoreKick 0 //[minimum score (negative)]
pb_sv_changePeriod 999 //[seconds]
pb_sv_changeMax 1 //[max name changes allowed]
pb_sv_dupNameGrace 0 //[seconds]
pb_sv_autoUpdBan 0 //[0=No, 1=Yes (default=0)]
pb_sv_extChar 0 //[0=No, 1=Yes (default=0)]
pb_sv_guidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
Posted Jul 1, 2007 - 06:17 AM
Posted Jul 1, 2007 - 06:33 AM
Log in as administrator on server and then type in console :
It should work.
Edited by Patachon, Jul 1, 2007 - 06:33 AM.
Posted Jul 1, 2007 - 09:21 AM
Posted Jul 2, 2007 - 07:32 AM
I do have full access to the server as it is a server unit that I own, and have restarted the server many times. I will try the webtool, but I do have a feeling that it isn't going to be the issue as each time I do start the server, it does start logging and the entire cfg file does load according to the pblog. Anything else I maybe missing here?
Posted Jul 2, 2007 - 08:13 AM
Posted Jul 2, 2007 - 12:05 PM
http://games.xs4all.nl/forums/viewtopic.php?p=28735#28735 (scroll down to pbsv.cfg)
Posted Jul 4, 2007 - 01:10 AM
Posted Jul 4, 2007 - 07:28 AM
Posted Jul 11, 2007 - 11:36 PM
Gotcha. Well, something must be amiss, cause I have tried the pbsv.cfg that was listed earlier here, but alas, no screeners. Where are they supposed to be created? I have a /fear/pb/svss folder but it remains empty. In SOF2 it creates a .sof folder alongside the SOF folder where it has a pb/svss folder where they are created. Is the FEAR/pb/svss folder the right directory for these screenshots to be created in, or is there something that isn't working right that maybe the reason they are not showing up?
Any other ideas? Kinda running out of them on this side.
Thanks for all your help so far.
Posted Jul 12, 2007 - 02:17 AM
I don't have the resources to help u out on this one. No linux available here
Posted Jul 12, 2007 - 04:14 AM
save and restart fear srv. Then open in your browser
PB Web Interface is really usefull in fear.
Posted Jul 12, 2007 - 11:05 AM
The ss folder is game_folder_name/pb/svss
When you issue some commands you need to do a pb restart from the web tool (command will be saved to config but not in use otherwise)
Some ftp progies seem to have issue linux/fear/host, you should also try a manual file refresh once logged in. If this happens to you after refresh the folder will be full. (no idea what causes this but once it shows the files it won't happen again)
** EDIT **
Also console in this game sux for using pb commands. As pb can't return reply text to the server console you can't trust that it applied the changes you asked.
change these in your file too you will find the very help full.
pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)] <---- player pb guid displayed in web tool
pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)] <---- If not used any pb bans will not be written to the ban file.
Edited by FuZZie, Jul 12, 2007 - 11:20 AM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users